CBVLY - CORRO CLEAN, 91495
- MSDS: CBVLY
- Manufacturer: PREMIER INDUSTRIAL CORP
- Product Name: CORRO CLEAN, 91495
- National Stock Number: 6850-00N000348
Product Identification
Product ID:CORRO CLEAN, 91495
MSDS Date:01/25/1993
FSC:6850
NIIN:00N000348
MSDS Number: CBVLY
Responsible Party
CLEVELAND, OH 44103
US
Emergency Phone: 216-391-8300
Info Phone: 216-391-8300
Preparer: SSL
Cage: 18399
Contractor
Telephone: 216-391-8300
Cage: 18399
Ingredients
PROPANE, 2-METHYL-; (ISOBUTANE)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 10%
OSHA PEL N/K
ACGIH TLV: N/K
WATER; (DEIONIZED WATER)
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 85-90%
OSHA PEL N/K
ACGIH TLV: N/K
1); (SODIUM BICARBONATE)
CAS: 144-55-8
RTECS: VZ0950000
Fraction By Weight: 3-7%
OSHA PEL N/K
ACGIH TLV: N/K
0.83 LBS/GAL; 96.61 G/L; % VOC
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS IN HIGH CONCENTRATION ARE
ANESTHETIC AND IRRITATE UPPER RESPIRATORY SYSTEM. EXCESS INHALATION
MAY CAUSE DIZZINESS, GIDDINESS AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES AND CALL MD. SKIN: WASH THOROUGHLY WITH PLENTY OF WATER AND
SOAP. INHALATION: IF AFFECTED, REMOVE TO FRESH AIR. INGESTION: SEEK
MD IMMEDIATELY, SHOW MSDS OR LABEL. DO NOTINDUCE VOMITING.
Fire Fighting
Flash Point:-40F,-40C
Lower Limits:1.9%
Upper Limits:8.5%
Extinguishing Media:EXTINGUISH WITH WATER/FOG/FOAM/DRY CHEMICAL/CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPOS TO FIRE, HEAT OR PRLNGD SUNLIGHT
MAY CAUSE BURSTING. IF USED IN CONFINED SPACES, HAZ VAPS MAY SPREAD
OR BUILD UP IN LOW AREAS. KEEP AWAY FROM (SUPDAT)
Accidental Release
Spill Release Procedures:IN CASE OF SPILL: FLUSH SMALL AMOUNTS TO SEWER
WITH PLENTY OF WATER. REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
AREA. CLEAN UP WITH ABOSORBENT MATERIAL. DISPOSE OF AS A
NON-HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:EXPOSURE TO FIRE, HEAT OR PROLONGED
SUNLIGHT MAY CAUSE BURSTING. KEEP IN A COOL PLACE. KEEP AWAY FROM
HEAT, SPARKS, FLAMES OR SOURCES OF IGNITION.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, SEEK MD IMMED, SHOW
LABEL/MSDS. DO NOT PUNCTURE, INCIN (OR BURN) CNTNRS. ALWAYS READ &
FOLLOW DIRECTIONS ON PROD LABEL. ADDNL TECHNICAL DATA SHEETS &/OR
MSDS ARE AVAIL UPO N REQUEST. FOR PROFESSIONAL & (SUPDAT)
Exposure Controls
Respiratory Protection:USE ONLY WITH ADEQUATE VENTILATION. IF
VENTILATION IS INADEQUATE, WEAR NIOSH/MSHA APPROVED RESPIRATORY
EQUIPMENT.
Ventilation:LOCAL AND MECHANICAL VENTILATION REQUIRED.
Protective Gloves:SOLVENT RESISTANT.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: HEAT, SPARKS, FLAMES OR SOURCES OF IGNIT. EXPLO POWER:HIGH.
BURNING RATE:HIGH. STATIC SENSITIVE:YES, FLAMM. OTHER PRECS:
INDUSTRIAL USE ONLY.
Chemical Properties
Boiling Pt:B.P. Text:11F,-12C
Melt/Freeze Pt:M.P/F.P Text:-140F,-96C
Vapor Pres:4.7 ATM
Vapor Density:2.0
Spec Gravity:1.0
pH:10
Evaporation Rate & Reference:>1 (H*2O=1)
Solubility in Water:HIGH
Appearance and Odor:LIQUID, AEROSOL
Percent Volatiles by Volume:90
Stability
Stability Indicator/Materials to Avoid:YES
NO.
Stability Condition to Avoid:KEEP IN A COOL PLACE.
Hazardous Decomposition Products:COMBUSTION PRODUCTS: CARBON MONOXIDE,
CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS. DO NOT PUNCTURE, INCINERATE (OR BURN)
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.